2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 126Get this manual
5Install the fuse block, start-in-gear relay, and the CDI; then install the body mounting cap screw into the bottom of the battery box6Install the battery and battery hold-down strap; then connect the positive battery cable and the negative battery cableNOTE: Always install the positive cable first; then install the negative cable 7Install the seat making sure it is latched securelyINSTALLING (Utility) 1Place the front and rear fenders into position on the frame and secure with the existing hardware; then install the gas tank coverTighten all fasteners securely2Connect the headlight and taillight connectors; then install the shift knob3Making sure the locating tabs engage the appropriate slots in the fenders, install the side panelsKM788A
5Install the front center cover; then install the front and rear racksTighten all fasteners securely6Install the battery; then connect the positive battery cable, negative battery cable, and battery hold-down strapNOTE: Always install the positive cable first; then install the negative cable