2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 108Get this manual
16Install the rear hub caps; then install the rear wheels and tighten to 32 ft-lb17Remove the ATV from the support stand KM469
15Install the rear brake calipers and tighten to 25 ft-lb
Troubleshooting Drive System
Problem: Power not transmitted from engine to wheels Condition Remedy
1Rear axle shaft serration wornbroken 1Replace shaft
Troubleshooting Brake System
Problem: Braking poor Condition
12345Pad worn Pedal free-play excessive Brake fluid leaking Hydraulic system entrapped air Master cylinderbrake cylinder seal worn
12345Replace pads Adjust free-play Repairreplace hydraulic system Bleed hydraulic system Replace appropriate cylinder