2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 100Get this manual

2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 100


11Disengage the universal joint from the transmission output shaft splines and set the driveshaft aside

14Place the right end (shorter length) of the axle on wood block; then using rubber mallet, drive the gear case from the axle
12Remove the eight cap screws securing the swing arm to the final drive gear case

CAUTION

Back to 2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual