2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 98Get this manual
3Slide the axle into the axle housing from the right side; then apply multipurpose grease to all splined areas of the axle4Install the sprocket and sprocket hub on the axle and secure with the snap ring; then install the drive chain
L Ts =TLs T: Torque wrench reading to be calculated Ts: Specified torque value (86 ft-lb) Ls: Tool offset length (center to center)
L: Length of torque wrench (handle pivot to headcenter)
5On the left side, install the brake disc assembly and spacer; then install the brake caliper and secure with the two cap screwsNOTE: To aid in tightening the axle nuts, engage the brake lever lockNOTE: It is necessary to calculate the torque value using the following formula due to the offset of the special tool used to tighten the axle nutsATV2189