2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 96Get this manual

2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 96


6Remove the brake disc assembly from the axle
9Remove the brake caliper holder and aligning collarAccount for the O-ring

7Loosen the drive chain (see Section 2); then slip the chain off the sprocket and remove the axle assembly from the right side

10Remove the four cap screws from the rear of the swing arm assembly; then remove the rear axle housing from the right side of the swing arm11Remove the snap ring securing the driven sprocket to the axle; then remove the sprocket

Back to 2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual