2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 73Get this manual
KC0019A
INSTALLING 1Connect the vent hose onto the carburetor2Place the throttle cable into position and secure by tightening the outer jam nut
5Connect the choke assembly to the carburetor6Install the air filter; then tighten the clamp securing the air inlet boot to the carburetorSecure the air filter housing to the frame with the cap screws7Install the gas tank; then install the seat
Throttle Cable Free-Play
To adjust throttle cable free-play, use the following procedure1Slide the rubber boot away from the adjuster; then loosen the jam nut (1) from the throttle cable adjuster (2)PR162B