2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 52Get this manual
21Remove the two cap screws securing the oil baffle to the crankcase and remove the baffle; then remove the snap ring securing the oil pump driven sprocket
NOTE: The starter one-way clutch bearing is direction oriented and will only function if installed properlyNote the markings or arrows when removed
AT THIS POINT
To service the stator coil, see Section 5
AT THIS POINT
To service the trigger coil, see Section 5
FOil Pump
NOTE: Steps 14-18 in the preceding sub-section must precede this procedure