2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 47Get this manual

2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 47

Removing Right-Side Components ATransmission (DVX) 1Drain the transmission lubricant into suitable container; then install the drain plug and tighten to 21 ft-lbKM611A

5Remove the shift shaft; then remove the plugAccount for one shift cam stopper ball, spring, and sealwasherKM106

2Remove the drive sprocket cover; then remove the cap screws and lock plate securing the sprocket to the driveshaft and remove the sprocketKM677A

3Remove the cap screws securing the transmission case cover to the transmission; then remove the coverAccount for the dowel pins and gasket

Back to 2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual