2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 46Get this manual
6Install the centrifugal clutch housing and clutch collar; then secure with the flange nut and tighten to 40 ft-lb KM369
4Place the fixed drive face into position on the crankshaft and engage the splines making sure the splines extend beyond the pulley face hub
5On the Utility, install the starter ratchet on the crankshaft making sure to engage the splines; then secure with the flange nut and tighten to 68 ft-lb
7Install the alignment pins and new gasket on the crankcase; then install the V-belt cover and secure with the cap screwsTighten securely8On the Utility, install the recoil starter and secure with the cap screwsTighten securely
Right-Side Components