2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 45Get this manual
3Install the pins and spacers into the fixed face hub; then pack the cam slots in the movable face with multi-purpose grease KM373
7Using suitable holding fixture, tighten the drive plate nut to 43 ft-lbKM384
4Install the spring seat over the hub and movable face hub
Installing Left-Side Components
ADrive Pulley BDriven PulleyCentrifugal Clutch Assembly CV-Belt Cover 1Install the movable drive face and drive pulley collar on the crankshaft2Open the faces of the driven pulley; then insert suitable wedge between the faces to hold them apart3Place the V-belt around the pulley and push the belt down between the pulley faces; then install the driven pulleycentrifugal clutch assembly onto the driveshaftLoop the V-belt over the drive pulley collar