2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 44Get this manual
6Measure the driven fixed face hub using calipersThe minimum service limit is 39.93 mm KM380B
7Measure the thickness of the centrifugal clutch shoe liningThe minimum service limit for the lining is 0.5 mmNOTE: If any shoe lining is below the service limit, the complete set must be replaced
Assembling 1Place the fixed face of the driven pulley on the pulley compressor baseKM382A
4Inspect the pins and bushings for wear, flat spots, looseness, or cracking
NOTE: Make sure the spacer is on the base or damage to the fixed face will occur when the spring is compressed