2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 39Get this manual
2Remove the ten cap screws securing the V-belt cover; then remove the cover noting the location of the two dowel pinsNote the condition of the V-belt cover gasketReplace if damaged KM369
6Remove the drive pulley collar and the movable drive face taking care not to loose the rollersKM253
3On the Utility using suitable holder to prevent the drive pulley from turning, remove the drive face nut and starter ratchet; then remove the drive pulley face
Servicing Left-Side Components
RECOIL STARTER (Utility)
! WARNING
Always wear safety glasses when servicing the recoil starter
RemovingDisassembling 1Remove the cap screws securing the recoil starter assembly to the V-belt cover; then remove the starterAccount for two alignment pinsKM365
4Hold the centrifugal clutch with suitable holder; then remove the clutch retaining nut and clutch collar