2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 38Get this manual
9Install the two alignment pins; then install the camshaft holder and secure with the four cylinder head nuts and washerUsing crisscross pattern, tighten to 18 ft-lb KM703
Left-Side Components
NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment
AT THIS POINT
To service any one specific component, only limited disassembly of components may be necessaryNote the AT THIS POINT information in each sub-sectionKM706A
10Install the cam chain tensioner assembly and tighten the mounting cap screws to ft-lb; then turn the tensioner screw counterclockwise to tension the cam chain
NOTE: The enginetransmission does not have to be removed from the frame for this procedure
Removing Left-Side Components