2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 29Get this manual

2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 29


13Remove the front and rear V-belt cooling boots from the V-belt housing; then remove the coolant hoses from the engine
14Loosen the output drive boot clamp; then slide the boot off the output housing
KM315A KM359A

15Disconnect the shift linkage from the transmission shift arm; then swing the shift linkage forward and out of the way16Remove the front engine through-bolt; then remove the two engine mounting brackets from the frame

Back to 2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual