2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 28Get this manual
Utility 1Remove the seat; then remove the battery box cover KM106A
4Remove the gas tank cover panel and gas tank vent hoseKM133A
2Remove the negative cable from the battery; then remove the positive cable3Drain the coolant, engine oil, and transmission gear lubricant; then install the drain plugs and tighten to 21 ft-lb
5Remove the side panels; then remove the front rack and front fenders (see Section 8)6Remove the air filter housing (see Section 4)7Remove the gas tank (see Section 4)8Remove the muffler assembly (see Section 8)9Remove the carburetor (see Section 4)10Remove the coil (see Section 5)11Disconnect the stator connector, shift position connector, trigger coil connector, and coolant temperature sensor