2010 Arctic Cat DVX 300 / 300 Utility ATV Service Manual, Page 16Get this manual
2Push the bulb in and turn it counterclockwise HeadlightTaillightBrakelight
Each time the ATV is used, lights should be checked for proper functionTurn the ignition switch to the LIGHTS position; the headlights and taillight should illuminateTest the brakelight by compressing the brake leverThe brakelight should illuminateHEADLIGHT
NOTE: The bulb portion of the headlight is fragileHANDLE WITH CAREWhen replacing the headlight bulb, do not touch the glass portion of the bulbIf the glass is touched, it must be cleaned with dry cloth before installingSkin oil residue on the bulb will shorten the life of the bulb
3Install the new bulb by turning it clockwise while pushing in4Install the lens cover
CAUTION
Tighten the lens cover screws only until they are snug
Shift Lever
CHECKING ADJUSTMENT
! WARNING
Do not attempt to remove the bulb when it is hotSevere burns may result