2010 Arctic Cat 700 Diesel SD ATV Service Manual, Page 179Get this manual
INSTALLING 1Place the shift rod into position on the engine shift arm and secure with the existing E-clip2Using new lock nut (B), secure the shift rod to the upper shift arm; then using two open-end wrenches, tighten securely AF679D
2Using pair of needle-nose pliers, place the spring into position on the actuator arm
3Place the spring into position between the upper shift arm and shift lever; then making sure the O-rings are in place on the axle, secure the shift lever to the arm with the existing axle and nut4Check shift lever adjustment (see Section 2); then tighten jam nut (A) securelyAF680D