2010 Arctic Cat 700 Diesel SD ATV Service Manual, Page 124Get this manual
3Loosen the alternator adjuster cap screw (A) and the pivot bolt (B); then remove the alternator drive belt
3Holding tension on the belt, tighten the adjuster cap screw securely; then remove the pry and tighten the pivot bolt securely4Connect the battery (B+) wire and connect the regulator control plug-in; then connect the negative battery cable to the battery5Install the left-side engine cover and seat making sure the seat latches securely
Neutral StartFront Drive Actuator Start-in-Gear Differential Lock 2WD Relays