2010 Arctic Cat 700 Diesel SD ATV Service Manual, Page 116Get this manual
NOTE: If the meter shows battery voltage, the main wiring harness is good; proceed to test the switchcomponent, the connector, and the switch wiring harness for resistance RESISTANCE (Switch Connector) 1Set the meter selector to the OHMS position2Connect the red tester lead to one black wire; then connect the black tester lead to the other black wireAR622D
3The meter must show battery voltageNOTE: If the meter shows no battery voltage, troubleshoot the battery, fuse, switch, or the main wiring harnessNOTE: If the meter shows battery voltage, the main wiring harness is good; proceed to test the switchcomponent, the connector, and the switch wiring harness for resistance
RESISTANCE (Switch Connector)
NOTE: The brake lever must be compressed for this testAlso, the ignition switch must be in the OFF position