2010 Arctic Cat 700 Diesel SD ATV Service Manual, Page 104Get this manual
Problem: Gears noisy (Noise seems to come from transmission) Condition 1Gears wornrubbing 2Splines worn 3Primary gears wornrubbing 4Bearings worn 5Bushing worn
1Replace gears 2Replace shaft(s) 3Replace gears 4Replace bearings 5Replace bushing
Problem: Gears noisy (Noise seems to come from secondary bevel gear and final driven shaft) Condition
1Drivedriven bevel gears damagedworn 2Backlash excessive 3Tooth contact improper 4Bearing damaged 5Gears wornrubbing 6Splines worn 7Final driven shaft thrust clearance too large
1Replace gears 2Adjust backlash 3Adjust contact 4Replace bearing 5Replace gears 6Replace shaft(s) 7Replace thrust washer(s)
Problem: Engine idles poorly Condition
1Valve clearance out of adjustment 2Valve seating poor 3Valve guides defective 4Rocker armsarm shaft worn 5Fuel injector obstructed 6Injector timing incorrect