2010 Arctic Cat 700 Diesel SD ATV Service Manual, Page 98Get this manual
3Align and connect the rear propeller shaft to the rear output drive flange and secure with four cap screws; then align and secure the front propeller shaft to the differential input flangeDE488
6Secure the driven pulley with flat washer and nut; then tighten the nut to 125 ft-lb7Install the movable drive clutch face and V-belt cover (see CheckingReplacing V-Belt in Section 2)ENGINETRANSMISSION 1Attach suitable lift and place the enginetransmission assembly into the frame from the left side tilting the engine forward sufficiently to clear the frame tubeDE081A