2010 Arctic Cat 700 Diesel SD ATV Service Manual, Page 97Get this manual
34The engine is now assembled and ready for connection to the transmissionsecondary transmission35Install the enginetransmission assembly (see Installing EngineTransmission in this section)
3Install the engine-to-transmission mounting plate and cap screws; then tighten the cap screws from step and from this step to 35 ft-lb
Installing EngineTransmission
NOTE: Arctic Cat recommends that new gaskets and O-rings be installed whenever servicing the ATVNOTE: If the enginetransmission was removed as an assembly, proceed to EngineTransmission in this sub-sectionIf only the transmission was removed, use the following procedure to installDE487