2010 Arctic Cat 700 Diesel SD ATV Service Manual, Page 64Get this manual
10Install the alternator belt and tighten so that 10 kg (22 lb) of force at the belt midpoint results in 10-15 mm (0.4-0.6 in of deflection; then tighten the mounting cap screws securely DE267
3Install the timing belt (see Left-Side Components in this section)DE103B
11Connect the shift linkage to the shift arm and secure with the E-clip12Install the front body panel; then install the front rackTighten the existing hardware securelyWATER PUMP Removing 1Remove the timing belt (see Left-Side Components in this section)2Drain the coolant (see Section 4)3Remove the lower radiator hose and the coolant bypass hose from the water pump; then remove four cap screws securing the water pump and remove the water pump4Thoroughly clean all gasket material from the engine block and water pumpServicing