2010 Arctic Cat 700 Diesel SD ATV Service Manual, Page 61Get this manual
2Remove the negative battery cable from the battery3Remove the shift linkage from the shift arm and swing the linkage forwardAccount for an E-clip, bushing, and washer4Loosen the alternator mounting cap screws and remove the alternator belt5Remove four cap screws securing the crankshaft pulley to the timing belt drive pulley; then install suitable holding fixture and remove the center cap screw (left-hand threads)DE214A
8Rotate the engine in the direction of rotation (clockwise facing the timing belt) until the reference mark (A) on the camshaft pulley aligns with the reference mark (B) on the cylinder head