2010 Arctic Cat 700 Diesel SD ATV Service Manual, Page 58Get this manual
Assembling Pre-Combustion ChambersGlow Plugs 1Carefully clean all carbon and cleaning residue from the sealing surfaces of the pre-combustion chamberscylinder head being careful not to nick or scratch the cylinder headNOTE: Non-caustic solvents may be used to assist in carbon removalDry with compressed air
3Insert the Pre-Combustion Chamber Index Tool into the glow plug bore while slightly shifting the chamber until the alignment tool properly engages the opening in the chamber; then completely thread the tool in and tighten securely
! WARNING
Always wear safety glasses when working with compressed air
2Making sure any spacersshims are correctly installed, place the pre-combustion chamber into the cylinder head with the glow plug opening directed toward the glow plug boreNOTE: To simplify installationorientation of the pre-combustion chamber, install the chamber on the removal tool; then place into the headRemove the tool after completing step 3