2010 Arctic Cat 700 Diesel SD ATV Service Manual, Page 23Get this manual

2010 Arctic Cat 700 Diesel SD ATV Service Manual, Page 23

7Secure the front fender to the footrest with the two cap screwsTighten securely8Install the right-side footrest (see Section 8) 3Depress and release the manual primer pump to charge the fuel filter and purge any air from the system
Fuel Filter
This diesel-powered ATV is equipped with high efficiency fuel filterThe fuel filter should be changed in accordance with the maintenance schedule or more often if operated under severe conditions or winter operationTo change the fuel filter, use the following procedure1Remove the right front fender splash panel; then using an appropriate filter wrench, remove the fuel filter2Apply light coat of oil to the seal ring of the new fuel filter; then install the filterTighten until the seal ring contacts the filter head; then tighten an additional 34 turnDE031A