2010 Arctic Cat 700 Diesel SD ATV Service Manual, Page 22Get this manual
2Push the V-belt down into the driven pulley approximately one inch; then squeeze the belt together and slide over the fixed drive hub and onto the one-way clutch DE094A
5Thread one of the V-belt cover screws into the fixed driven face and turn clockwise to open the driven pulley faces6Push the V-belt down between the sheaves of the driven pulley approximately one inch; then making sure not to dislocate the one-way clutch from the fixed drive hub, squeeze the belt together and remove from the drive clutchDE098A
3Pinch the V-belt together near its center and slide the movable drive face onto the drive hubSecure the drive face with nut (threads coated with red Loctite #271)Tighten the nut to 85 ft-lb