2010 Arctic Cat 700 Diesel SD ATV Service Manual, Page 17Get this manual
HeadlightTaillightBrakelight Each time the ATV is used, lights should be checked for proper functionRotate the ignition switch to the lights position; the headlights and taillight should illuminateTest the brakelight by compressing the brake leverThe brakelight should illuminateHEADLIGHT
NOTE: The bulb portion of the headlight is fragileHANDLE WITH CAREWhen replacing the headlight bulb, do not touch the glass portion of the bulbIf the glass is touched, it must be cleaned with dry cloth before installingSkin oil residue on the bulb will shorten the life of the bulbCF132A
3Insert the socket into the housing and turn it clockwise to secureCHECKINGADJUSTING HEADLIGHT AIM The headlights can be adjusted vertically and horizontallyThe geometric center of the HIGH beam light zone is to be used for vertical and horizontal aiming1Position the ATV on level floor so the headlights are approximately 6.1 (20 ft) from an aiming surface (wall or similar aiming surface)NOTE: There should be an average operating load on the ATV when adjusting the headlight aim