2009 Arctic Cat Prowler XTZ ATV Service Manual, Page 124Get this manual

2009 Arctic Cat Prowler XTZ ATV Service Manual, Page 124

Shimming Procedure Shim Selection 1Press bearings into bores by outer ring to hard contact with seat2Install the lock collar and tighten to 120 ft-lb; then stake the lock collar edge approximately 1.5 mm (0.060 in into the lower oil channel Assembling Differential Assembly 1Install the bearing onto the pinion shaftInstall the pinion shaft collar

3Note the following shim selections (shims are nominally 1.5 mm0.060 inthick):

Back to 2009 Arctic Cat Prowler XTZ ATV Service Manual