2009 Arctic Cat Prowler XTZ ATV Service Manual, Page 22Get this manual

2009 Arctic Cat Prowler XTZ ATV Service Manual, Page 22


5Remove the cap screws securing the CVT cover; then using rubber mallet, gently tap on the cover tabs to loosen the coverRemove the cover6Remove the nut securing the movable drive face; then remove the faceAccount for the flat washer and spacerNOTE: Keep the drive face plate in contact with the drive face when removing or installing the drive face to prevent the rollers from falling out

INSTALLING 1Place the V-belt into position on the driven pulley and over the front shaft

Back to 2009 Arctic Cat Prowler XTZ ATV Service Manual