2009 Arctic Cat Prowler XT/XTX ATV Service Manual, Page 173Get this manual
2Install the shoulder screw and secure with the flange nut (threads coated with blue Loctite #243)Tighten to 20 ft-lb 3Remove the nuts securing the gauge assembly to the dash; then unplug the multi-pin connector and remove the gauge from the vehicle
Speedometer TachometerLCD Indicator Lights
REPLACING 1Remove the six screws securing the dash panel to the frame; then remove the parking brake handle and jam nut2Slide the dash panel to the rear sufficiently to access the components