2009 Arctic Cat Prowler XT/XTX ATV Service Manual, Page 168Get this manual
Seats REMOVINGINSTALLING 1To remove seat, pull the seat lock lever upRaise the front of the seat and slide it forward
2To install seat, slide the rear of the seat into the seat retainers and push down firmly on the front of seatThe seat should automatically lock into position
Troubleshooting
Problem: Handling too heavy or stiff Condition
1Front wheel alignment incorrect 2Lubrication inadequate 3Tire inflation pressure incorrect 4Tie rod ends seizing 5Linkage connections seizing
1Adjust alignment 2Lubricate appropriate components 3Adjust pressure 4Replace tie rod ends 5Repairreplace connections
Problem: Steering oscillation Condition
1Tires inflated unequally 2Wheel(s) wobbly 3Wheel hub cap screw(s) loosemissing 4Wheel hub bearing worndamaged 5Tie rod ends wornloose 6Tires defectiveincorrect 7A-arm bushings damaged 8Boltsnuts (frame) loose 1Adjust pressure 2Replace wheel(s) 3Tightenreplace cap screws 4Replace bearing 5Replacetighten tie rod ends 6Replace tires 7Replace bushings 8Tighten boltsnuts