2009 Arctic Cat Prowler XT/XTX ATV Service Manual, Page 167Get this manual
2Align the holes in the upper pivot housings with the holes in the cargo box; then install the lower pivot housings and secure with the four shoulder cap screwsTighten to 20 ft-lb3Raise the cargo box; then connect the lift support to the frame, install the cap screw and nut, and tighten the nut securely4Lower the cargo box and lock into position PR473A
Taillight Assembly
REMOVING 1Remove two torx-head screws securing the taillight assembly to the rear canopy tube; then rotate the taillight assembly left or right to allow the connector to clear the access opening
2Loosen but do not remove the four shoulder cap screws securing the pivot housings to the cargo box