2009 Arctic Cat Prowler XT/XTX ATV Service Manual, Page 136Get this manual
8Apply 40 grams (13 of contents) of grease from the grease pack included in Front Axle Boot Repair Kit into the knuckles and the new outside boot CD024
ASSEMBLING AXLES
ATV-1052
1Install the inner boot with the small clamp making sure the ends of the clamp are positioned correctlyNOTE: The boot is positioned correctly when the small end of the boot seats down into the recessed groove
NOTE: The grease pack contains 120 grams of greaseThe inside joint (double-offset) requires approximately 70-90 grams of grease and the outside (bell-type) requires approximately 35-55 gramsWhen replacing boots, use 23 of the pack for inside boots and 13 of the pack for outside boots
! CAUTION
Do no over-fill the joint as boot damage may occur resulting in joint failure