2009 Arctic Cat Prowler XT/XTX ATV Service Manual, Page 52Get this manual

15Install the shift arm on the shift arm shaft making sure the scribed marks (from removing) are alignedTighten securely16Place the gasket and outer magneto cover into position on the right-side cover; then tighten four screws to ft-lb Left-Side Components
NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgmentCD963

AT THIS POINT
To service any one specific component, only limited disassembly of components may be necessaryNote the AT THIS POINT information in each sub-sectionCD966A

NOTE: The enginetransmission does not have to be removed from the frame for this procedure

• ATV
• Jet Ski
• Outboard Motors
• Personal Watercraft
• Snowmobiles
• Stern Drives