2009 Arctic Cat Prowler XT/XTX ATV Service Manual, Page 19Get this manual
4To replace the brake pads, use the following procedureARemove the wheelBRemove the cap screws securing the caliper holder to the knuckle; then remove the pads from the caliper 3If the rear wheels are not locked, it must be adjusted (set up)ADJUSTING To adjust (set up) the parking brake, use the following procedureNOTE: Remove the four rear body screws securing the belly panel to the frame and allow it to drop down for better access to the parking brake actuator
CInstall the new brake padsDSecure the caliper holder to the knuckle with the cap screwsTighten to 20 ft-lb
1Remove the parking brake cable from the actuator lever; then remove the actuator nut and actuator leverNote the position of the lever before removing