2009 Arctic Cat 400/500/550/700/550/700/1000 ATV Service Manual, Page 317Get this manual
2Compress the caliper holder toward the caliper and install the inner brake pad; then install the outer pad
3Place the brake caliper assembly into position and secure with the cap screwsTighten the caliper to 20 ft-lb4Place new crush washer on each side of the brake hose fitting and install it on the caliperTighten to 20 ft-lb5Fill the reservoir; then bleed the brake system (see Section 2)6Install the wheelTighten to 40 ft-lb7Remove the ATV from the support stand and verify brake operation