2009 Arctic Cat 400/500/550/700/550/700/1000 ATV Service Manual, Page 168Get this manual
Installing Right-Side Components AOil StrainerOil Pump BGear Shift Shaft 1Place the oil strainer into position beneath the crankcase and tighten securely with the Phillips-head cap screws
4Place the pin and washer into position on the oil pump shaft, install the oil pump driven gear, and secure with the snap ring
5Place the gear shift cam plate and guide onto the gear shift cam making sure the alignment pin was installedSecure assembly with the cap screw coated with blue Loctite #243Tighten securely