2009 Arctic Cat 400/500/550/700/550/700/1000 ATV Service Manual, Page 72Get this manual
NOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs 6In crisscrosscase-to-case pattern, tighten the mm cap screws to 10 ft-lbNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs
AT THIS POINT
After completing center crankcase components, proceed to Installing Right-Side Components, to Installing Left-Side Components, and to Installing Top-Side Components
2Using plastic mallet, lightly tap the case halves together until cap screws can be installed3From the right side, install the crankcase cap screws noting the location of the different-sized cap screws; then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs while tightening the cap screws