2009 Arctic Cat 366 ATV Service Manual, Page 102Get this manual
2Install the input shaft seal making sure it is flush with the edge of the housing3Lubricate the input shaft splines with High-Performance #2 Molybdenum Disulphide GreaseNOTE: Any time drive splines are separated, clean all splines with parts-cleaning solvent and dry with compressed air; then lubricate with recommended grease AF984
Assembling Input Shaft 1Place the pinion housing in press and install the input shaft bearingSecure the bearing with the existing snap ring making sure the sharp edge of the snap ring faces to the outside