2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual, Page 101Get this manual

2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual, Page 101


3Inspect all splines and hubs for excessive wear, chips, cracks, or distortion
7Check the final drive gear case assembly for smooth gear operationIf gears are noisy or if there is any catching or binding, the gear case assembly must be replacedREPLACING SWING ARM SEALS AND BEARINGS To replace damaged or worn seals and bearings in the swing arm assembly, use the following procedure1Remove the dust seals from the swing arm pivot; then using slide hammer and bearing puller, remove the pivot bearings

Back to 2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual