2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual, Page 97Get this manual

2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual, Page 97

ATV2185

2Measure the rear axle runout as shown using blocks and dial indicatorIf the axle runout exceeds 1.5 mm (0.06 in, the axle must be replaced
2Clean the axle housing and inspect for cracks, elongated holes, and wear in bearing boresInstalling Bearings 1Pack the new bearings with good quality wheel bearing grease; then install the right bearing first using an appropriate bearing installerThe sealed side of the bearing must be directed inward2Install the spacer; then install the left bearing

Back to 2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual