2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual, Page 64Get this manual

2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual, Page 64


6Tighten the nuts on the two rear and one front through-bolt to 29 ft-lb7Connect the shift linkage using the existing hardware8Install the output drive boot onto the bevel driven gear housing and secure with the existing clamp
11Connect the coolant temperature sensor; then connect the trigger coil connector, shift position connector, and stator connector

Back to 2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual