2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual, Page 52Get this manual

2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual, Page 52


21Remove the two cap screws securing the oil baffle to the crankcase and remove the baffle; then remove the snap ring securing the oil pump driven sprocket

NOTE: The starter one-way clutch bearing is direction oriented and will only function if installed properlyNote the markings or arrows when removed

AT THIS POINT
To service the stator coil, see Section 5

Back to 2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual