2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual, Page 20Get this manual

2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual, Page 20


3Install the wheel and secureTighten to 32 ft-lb4Remove the ATV from the support standNOTE: Whenever installing new pads, the new pads must be burnished (see Burnishing Brake Pads in this section)
2Remove the brake spring plate; then remove the brake pads
MEASURINGREPLACING REARAUXILIARY BRAKE PADS (DVX 300) Removing
NOTE: The brake caliper on the DVX 300 contains two sets of brake padsThe front pads are controlled by the main brake lever and the rear pads are controlled by the auxiliary brake pedal

Back to 2009 Arctic Cat 250 Utility / DVX 300 ATV Service Manual