2009 Arctic Cat 150 ATV Service Manual, Page 100Get this manual
INSTALLING 1Slide the right brake lever assembly onto the handlebar; do not tighten the screw completely at this time MD2461
Throttle Control
2Install the throttle cable into the throttle control housing; then install the cover and secure with the screws
REMOVING 1Remove the boot from the throttle cable adjuster; then loosen the jam nut and turn the adjuster completely in to loosen the cable2Remove the three machine screws securing the cover to the throttle control; then remove the cover and disengage the throttle cable from the throttle arm3Turn the cable adjuster out of the throttle control housing; then remove the two machine screws securing the throttle control to the handlebar and remove the throttle control