2009 Arctic Cat 150 ATV Service Manual, Page 93Get this manual
5Install the handlebar to the steering and tighten the clamp cap screws to 15 ft-lb making sure to tighten the front cap screws first ATV2205
4Adjust toe-in to 15 mm (0.60 in; then measure distances (C) and (D)Distances (C) and (D) should be equal5After all the adjustments are to specifications, tighten the tie-rod lock nuts to 22 ft-lbNOTE: Prior to locking the jam nuts, make sure the ball joints are at the center of their normal range of motion and at the correct angleNOTE: The front wheels do not have to be removed to adjust the tie rodAlso, care should be taken not to disturb the handlebar position
REMOVING