2009 Arctic Cat 150 ATV Service Manual, Page 88Get this manual
CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
CHECKINGINFLATING 1Using an air pressure gauge, measure the air pressure in each tireAdjust the air pressure as necessary to meet the recommended inflation pressure2Inspect the tires for damage, wear, or punctures
1Clean the wheels and hubs with parts-cleaning solvent2Clean the tires with soap and water3Inspect each wheel for cracks, dents, or bends4Inspect each tire for cuts, wear, missing lugs, and leaksINSTALLING 1Install each wheel on its hubNOTE: Make sure each wheel is installed on its proper hub as noted in removing (the "rotation arrow" must indicate forward direction of rotation)
! WARNING
Do not operate the ATV if tire damage exists
NOTE: If repair is needed, follow the instructions found on the tire repair kit or remove the wheel and have it repaired professionallyNOTE: Make sure all tires are the specified size and have identical tread pattern