2009 Arctic Cat 150 ATV Service Manual, Page 81Get this manual
4Coat the axle threads with red Loctite #271 and install one axle nut; then using the Rear Axle Nut Wrench, tighten the inner axle nut to calculated specification L: Length of torque wrench (handle pivot to headcenter)
ATV2189 TR235
L Ts =TLs T: Torque wrench reading to be calculated Ts: Specified torque value (86 ft-lb) Ls: Tool offset length (center to center)
5Install the outer axle nut and tighten to calculated specification6Adjust the drive chain (see Section 2); then tighten the two cap screws and adjuster nut7Install the wheel hubs and tighten the rear wheel hub nuts to 50 ft-lb; then install the cotter pins and hub caps8Install the rear wheels and tighten to 32 ft-lb
Troubleshooting Drive System