2009 Arctic Cat 150 ATV Service Manual, Page 63Get this manual
4Remove the cap screws securing the gas tank to the frame KM043A
5Remove the vent hose; then remove the gas tankCLEANING AND INSPECTING
NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
In the OFF position, the valve will not allow gasoline to flow to the carburetorIn the ON position (the normal operating position), gasoline will flow from the tank to the carburetorIn this position 4.54 (1.2 U.Sgal will remain in the tank as reserve quantityMoving the valve to the RES position will allow the operator to use the remaining gasoline in the tankWhen turning the valve to any of the three positions, make sure the indicator is pointed directly at the position desiredREMOVINGINSPECTING